The purchase of our WoodMizer portable sawmill in January 2008 & Kiln in 2011 opened many doors. It allows us to produce much of our own lumber as well as specialty cuts that can be nearly impossible to find. It also allows us to explore new levels of creativity as well as further broadened the number of services we are able to offer to our customers. Use wood cut from your own trees for flooring, molding, cabinets, etc...
Sawmill WoodMizer LT50 wide
Bring the logs and you stay to help stack for a flat $70/hr, no minimum or set up fee. If we do all the work $.55 per board foot for flat sawn, $.65 per board foot. We are no longer offering on site sawmill service due to converting the mill to run on electric.
Blade charges: Average daily use is approximately 2 to 3 blades per day (included). Additional blades may be used if there is excessive dirt in/on the logs or embedded metal and are charged @ $35/blade.
Kiln Drying
$0.55/bf, 250 bf minimum. This is not a short term process – lumber must be air dried to 15-20%mc (aprox 3 months per inch of thickness) before being place in the kiln and dried to 6-8%mc.
Sawmill WoodMizer LT50 wide
Bring the logs and you stay to help stack for a flat $70/hr, no minimum or set up fee. If we do all the work $.55 per board foot for flat sawn, $.65 per board foot. We are no longer offering on site sawmill service due to converting the mill to run on electric.
Blade charges: Average daily use is approximately 2 to 3 blades per day (included). Additional blades may be used if there is excessive dirt in/on the logs or embedded metal and are charged @ $35/blade.
Kiln Drying
$0.55/bf, 250 bf minimum. This is not a short term process – lumber must be air dried to 15-20%mc (aprox 3 months per inch of thickness) before being place in the kiln and dried to 6-8%mc.